Skip to content

2008 Hummer H2 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Hummer H2.

2008 Hummer H2 tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear.

Hummer H2 H2

2002 – 2009 2 trims

H2 6.0i

325 hp · 6.0L LQ4 V8 315/70 R17 120R 6 fitments
GenerationH2 2002–2009
Power325 hp
Engine6.0L LQ4 V8, Petrol
Center bore117 mm
PCD8x165.1
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
315/70 R17 120R17x8.5 ET18 8x165.139TiresRims
34x12.50 R1717x8.5 ET18 8x165.139TiresRims
34x12.50 R1818x8.5 ET15 8x165.142TiresRims
35x13.50 R2020x9 ET10 8x165.144TiresRims
325/50 R22 115H22x9.5 ET10 8x165.144TiresRims
35x14.00 R2222x10 ET0 8x165.146TiresRims

H2 6.2i

393 hp · 6.2L L92 V8 315/70 R17 120R 6 fitments
GenerationH2 2002–2009
Power393 hp
Engine6.2L L92 V8, Petrol
Center bore117 mm
PCD8x165.1
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
315/70 R17 120R17x8.5 ET18 8x165.139TiresRims
34x12.50 R1717x8.5 ET18 8x165.139TiresRims
34x12.50 R1818x8.5 ET15 8x165.142TiresRims
35x13.50 R2020x9.5 ET10 8x165.144TiresRims
325/50 R22 115H22x9.5 ET10 8x165.144TiresRims
35x14.00 R2222x10 ET0 8x165.146TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.