2010 Hummer H3 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Hummer H3.

2010 Hummer H3 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2005 – 2010 USA market 2 trims

239 hp · 3.7L LLR I5 265/75 R16 116S 4 fitments

GenerationI 2005–2010

Power239 hp

Engine3.7L LLR I5, Petrol

Center bore100.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/75 R16 116S	16x7.5 ET38 ~~6x139.7~~	30	Tires Rims
285/75 R16 122S	16x7.5 ET38 ~~6x139.7~~	35	Tires Rims
265/70 R17 115S	17x7.5 ET38 ~~6x139.7~~	30	Tires Rims
265/65 R18 114S	18x8 ET38 ~~6x139.7~~	35	Tires Rims

300 hp · 5.3L LH8 V8 265/75 R16 116S 4 fitments

GenerationI 2005–2010

Power300 hp

Engine5.3L LH8 V8, Petrol

Center bore100.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/75 R16 116S	16x7.5 ET38 ~~6x139.7~~	30	Tires Rims
285/75 R16 122S	16x7.5 ET38 ~~6x139.7~~	35	Tires Rims
265/70 R17 115S	17x7.5 ET38 ~~6x139.7~~	30	Tires Rims
265/65 R18 114S	18x8 ET38 ~~6x139.7~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.