Skip to content

2009 Hyundai Click tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2009 Hyundai Click.

2009 Hyundai Click tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2009

Open a trim for its factory package and every alternative size, front and rear.

Hyundai Click I Facelift

2005 – 2011 South Korea market 3 trims

Click 1.4i

94 hp · I4 175/65 R14 82T 3 fitments
GenerationI Facelift 2005–2011
Power94 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5.5 ET46 4x100TiresRims
185/55 R15 82H15x6 ET40 4x100TiresRims
195/45 R1616x6.5 ET38 4x100TiresRims

Click 1.5 CRDi GLS

111 hp · I4 175/65 R14 82T 3 fitments
GenerationI Facelift 2005–2011
Power111 hp
EngineI4, Diesel
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5.5 ET46 4x100TiresRims
185/55 R15 82H15x6 ET38 4x100TiresRims
195/45 R1616x6.5 ET38 4x100TiresRims

Click 1.6i

105 hp · I4 175/65 R14 82T 3 fitments
GenerationI Facelift 2005–2011
Power105 hp
EngineI4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R14 82T14x5.5 ET46 4x100TiresRims
185/55 R15 82H15x6 ET46 4x100TiresRims
195/45 R1616x6.5 ET40 4x100TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.