Skip to content

2000 Hyundai Dynasty tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2000 Hyundai Dynasty.

2000 Hyundai Dynasty tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2000

Open a trim for its factory package and every alternative size, front and rear.

Hyundai Dynasty I

1996 – 2005 Southeast Asia market 3 trims

Dynasty 2.5i

168 hp · V6 205/60 R15 3 fitments
GenerationI 1996–2005
Power168 hp
EngineV6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R1515x6 ET42 5x114.3–TiresRims
195/70 R1414x5.5 ET46 5x114.3–TiresRims
225/50 R1616x6.5 ET38 5x114.3–TiresRims

Dynasty 3.0i

200 hp · V6 205/60 R15 3 fitments
GenerationI 1996–2005
Power200 hp
EngineV6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R1515x6 ET42 5x114.3–TiresRims
195/70 R1414x5.5 ET46 5x114.3–TiresRims
225/50 R1616x6.5 ET38 5x114.3–TiresRims

Dynasty 3.5i

220 hp · V6 205/60 R15 3 fitments
GenerationI 1996–2005
Power220 hp
EngineV6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R1515x6 ET42 5x114.3–TiresRims
195/70 R1414x5.5 ET46 5x114.3–TiresRims
225/50 R1616x6.5 ET38 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.