Skip to content

1998 Hyundai Elantra tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1998 Hyundai Elantra.

Bolt pattern
Fitment tables

5 trims sold in 1998

Open a trim for its factory package and every alternative size, front and rear.

Hyundai Elantra II (J2/RD)

1995 – 2000 5 trims

Elantra 1.5

86 hp · I4 175/65 R14 2 fitments
GenerationII (J2/RD) 1995–2000
Power86 hp
EngineI4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R1414x5.5 ET46 4x114.3–TiresRims
185/55 R1515x6 ET40 4x114.3–TiresRims

Elantra 1.6

113 hp · I4 175/65 R14 2 fitments
GenerationII (J2/RD) 1995–2000
Power113 hp
EngineI4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R1414x5.5 ET46 4x114.3–TiresRims
185/55 R1515x6 ET40 4x114.3–TiresRims

Elantra 1.8

126 hp · I4 195/60 R14 2 fitments
GenerationII (J2/RD) 1995–2000
Power126 hp
EngineI4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R1414x5.5 ET46 4x114.3–TiresRims
205/50 R1515x6 ET40 4x114.3–TiresRims

Elantra 1.9

67 hp · I4 175/65 R14 2 fitments
GenerationII (J2/RD) 1995–2000
Power67 hp
EngineI4, Diesel
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R1414x5.5 ET46 4x114.3–TiresRims
185/55 R1515x6 ET40 4x114.3–TiresRims

Elantra 2.0

137 hp · I4 195/65 R14 2 fitments
GenerationII (J2/RD) 1995–2000
Power137 hp
EngineI4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/65 R1414x5.5 ET46 4x114.3–TiresRims
205/55 R1515x6 ET40 4x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.