1992 Hyundai Excel tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1992 Hyundai Excel.

1992 Hyundai Excel tire sizes

175/70R13 185/60R14

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1989 – 1998 2 trims

61 hp · I4 175/70 R13 2 fitments

GenerationX2 1989–1998

Power61 hp

EngineI4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13	13x5 ET38 ~~4x114.3~~	–	Tires Rims
185/60 R14	14x5.5 ET35 ~~4x114.3~~	–	Tires Rims

80 hp · I4 185/60 R14 2 fitments

GenerationX2 1989–1998

Power80 hp

EngineI4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/60 R14	14x5.5 ET35 ~~4x114.3~~	–	Tires Rims
175/70 R13	13x5 ET38 ~~4x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.