2011 Hyundai Genesis Coupe tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Hyundai Genesis Coupe.

2011 Hyundai Genesis Coupe tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2008 – 2012 2 trims

210 hp · 2.0L G4KF I4 225/45 R18 91W / 245/45 R18 96W 2 fitments

GenerationBK 2008–2012

Power210 hp

Engine2.0L G4KF I4, Petrol

Center bore66.7 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front225/45 R18 91W	18x7.5 ET35 ~~5x114.3~~	35	Tires Rims
Rear245/45 R18 96W	18x8 ET35 ~~5x114.3~~	35	Tires Rims
Front225/40 ZR19 89Y	19x8 ET35 ~~5x114.3~~	35	Tires Rims
Rear245/40 ZR19 94Y	19x8.5 ET35 ~~5x114.3~~	35	Tires Rims

306 hp · 3.8L G6DA V6 225/45 R18 91W / 245/45 R18 96W 2 fitments

GenerationBK 2008–2012

Power306 hp

Engine3.8L G6DA V6, Petrol

Center bore66.7 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
Front225/45 R18 91W	18x7.5 ET35 ~~5x114.3~~	35	Tires Rims
Rear245/45 R18 96W	18x8 ET35 ~~5x114.3~~	35	Tires Rims
Front225/40 ZR19 89Y	19x8 ET35 ~~5x114.3~~	35	Tires Rims
Rear245/40 ZR19 94Y	19x8.5 ET35 ~~5x114.3~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.