1988 Hyundai Grandeur tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1988 Hyundai Grandeur.

1988 Hyundai Grandeur tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1986 – 1992 South Korea market 3 trims

135 hp · I4 195/70 R14 3 fitments

GenerationI (L) 1986–1992

Power135 hp

EngineI4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/70 R14	14x6 ET10 ~~5x114.3~~	–	Tires Rims
195/60 R15	15x6 ET10 ~~5x114.3~~	–	Tires Rims
195/55 R16	16x6.5 ET10 ~~5x114.3~~	–	Tires Rims

145 hp · I4 195/70 R14 3 fitments

GenerationI (L) 1986–1992

Power145 hp

EngineI4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/70 R14	14x5 ET40 ~~5x114.3~~	–	Tires Rims
195/60 R15	15x5.5 ET40 ~~5x114.3~~	–	Tires Rims
195/55 R16	16x6 ET40 ~~5x114.3~~	–	Tires Rims

192 hp · V6 205/60 R14 3 fitments

GenerationI (L) 1986–1992

Power192 hp

EngineV6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/60 R14	14x5 ET40 ~~5x114.3~~	–	Tires Rims
205/55 R16	16x5.5 ET40 ~~5x114.3~~	–	Tires Rims
205/50 R16	16x6 ET40 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.