Skip to content

2005 Hyundai Grandeur tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Hyundai Grandeur.

Bolt pattern

2 generations were sold in 2005. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Hyundai Grandeur IV (TG)

2005 – 2011 South Korea market 1 trim

Grandeur 3.3i

232 hp · 3.3L G6DB V6 225/60 R16 98V 4 fitments
GenerationIV (TG) 2005–2011
Power232 hp
Engine3.3L G6DB V6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/60 R16 98V16x6.5 ET39 5x114.3TiresRims
235/55 R17 99V17x6.5 ET39 5x114.3TiresRims
245/45 ZR18 91Y18x8 ET43 5x114.3TiresRims
245/40 R1919x8 ET35 5x114.3TiresRims

Hyundai Grandeur III (XG)

1998 – 2005 South Korea market 3 trims

Grandeur 2.5

177 hp · V6 205/65 R15 2 fitments
GenerationIII (XG) 1998–2005
Power177 hp
EngineV6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R1515x6 ET40 5x114.3TiresRims
215/55 R1616x6 ET40 5x114.3TiresRims

Grandeur 3.0

190 hp · V6 205/65 R15 2 fitments
GenerationIII (XG) 1998–2005
Power190 hp
EngineV6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R1515x5.5 ET40 5x114.3TiresRims
225/55 R1616x5.5 ET40 5x114.3TiresRims

Grandeur 3.5

197 hp · V6 205/65 R15 2 fitments
GenerationIII (XG) 1998–2005
Power197 hp
EngineV6, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R1515x5.5 ET40 5x114.3TiresRims
215/55 R1616x5.5 ET40 5x114.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.