1996 Hyundai H-1 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Hyundai H-1.

1996 Hyundai H-1 tire sizes

Bolt patterns

I (A1)

I (A1)

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1996 – 2004 2 trims

110 hp · I4 195x R14 106R 3 fitments

GenerationI (A1) 1996–2004

Power110 hp

EngineI4, Petrol

Center bore67.1 mm

PCD5x120

ThreadM14 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195x R14 106R	14x5.5 ET40 ~~5x120~~	41	Tires Rims
205/70 R15 100S	15x6 ET40 ~~5x120~~	41	Tires Rims
215/65 R16 102S	16x6.5 ET40 ~~5x120~~	41	Tires Rims

110 hp · I4 195/80 R14 106R 3 fitments

GenerationI (A1) 1996–2004

Power110 hp

EngineI4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/80 R14 106R	14x5.5 ET40 ~~5x114.3~~	41	Tires Rims
205/70 R15 100S	15x6 ET40 ~~5x114.3~~	41	Tires Rims
215/60 R16 100S	16x6.5 ET40 ~~5x114.3~~	41	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.