2013 Hyundai HB20 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Hyundai HB20.

2013 Hyundai HB20 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2012 – 2015 Latin America market 3 trims

79 hp · G3LC I3 Flex-Fuel 175/70 R14 84T 2 fitments

GenerationI (HB) 2012–2015

Power79 hp

EngineG3LC I3 Flex-Fuel

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R14 84T	14x5 ET41 ~~4x100~~	32	Tires Rims
185/60 R15 84H	15x5.5 ET46 ~~4x100~~	32	Tires Rims

105 hp · G3LC I3 Flex-Fuel 185/60 R15 84H 2 fitments

GenerationI (HB) 2012–2015

Power105 hp

EngineG3LC I3 Flex-Fuel

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/60 R15 84H	15x5.5 ET46 ~~4x100~~	32	Tires Rims
185/55 R16 84H	16x6 ET43 ~~4x100~~	32	Tires Rims

126 hp · G4FC I4 Flex-Fuel 185/60 R15 84H 2 fitments

GenerationI (HB) 2012–2015

Power126 hp

EngineG4FC I4 Flex-Fuel

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185/60 R15 84H	15x5.5 ET46 ~~4x100~~	32	Tires Rims
185/55 R16 84H	16x6 ET43 ~~4x100~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.