2010 Hyundai i10 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Hyundai i10.

2010 Hyundai i10 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2008 – 2011 Europe market 3 trims

74 hp · I3 175/60 R14 79H 2 fitments

GenerationI (PA) 2008–2011

Power74 hp

EngineI3, Diesel

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/60 R14 79H	14x5 ET46 ~~4x100~~	–	Tires Rims
175/50 R15 75H	15x5.5 ET46 ~~4x100~~	–	Tires Rims

66 hp · 1.1L I4 155/70 R13 75T 2 fitments

GenerationI (PA) 2008–2011

Power66 hp

Engine1.1L I4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155/70 R13 75T	13x4 ET46 ~~4x100~~	33	Tires Rims
165/60 R14 75T	14x5 ET46 ~~4x100~~	33	Tires Rims

76 hp · I4 175/60 R14 79H 2 fitments

GenerationI (PA) 2008–2011

Power76 hp

EngineI4, Petrol

Center bore54.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/60 R14 79H	14x5 ET46 ~~4x100~~	–	Tires Rims
175/50 R15 75H	15x5.5 ET46 ~~4x100~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.