Skip to content

2021 Hyundai i30 N tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Hyundai i30 N.

2021 Hyundai i30 N tire sizes

Bolt pattern

2 generations were sold in 2021. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2021

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Hyundai i30 N I (PD) Facelift

2021 – 2025 Europe market 2 trims

i30 N 2.0 T-GDi

276 hp · 2.0L G4KH I4 235/35 ZR19 91Y 2 fitments
GenerationI (PD) Facelift 2021–2025
Power276 hp
Engine2.0L G4KH I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/35 ZR19 91Y19x8 ET55 5x114.335TiresRims
235/30 ZR20 89Y20x8 ET50 5x114.335TiresRims

i30 N 2.0 T-GDi

247 hp · 2.0L G4KH I4 225/40 ZR18 92Y 2 fitments
GenerationI (PD) Facelift 2021–2025
Power247 hp
Engine2.0L G4KH I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/40 ZR18 92Y18x7.5 ET53 5x114.335TiresRims
235/35 ZR19 91Y19x8 ET55 5x114.335TiresRims

Hyundai i30 N I (PD)

2017 – 2021 2 trims

i30 N 2.0 T-GDi

271 hp · 2.0L G4KH I4 235/35 ZR19 91Y 2 fitments
GenerationI (PD) 2017–2021
Power271 hp
Engine2.0L G4KH I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
235/35 ZR19 91Y19x8 ET55 5x114.335TiresRims
235/30 ZR20 89Y20x8 ET50 5x114.335TiresRims

i30 N 2.0 T-GDi

247 hp · 2.0L G4KH I4 225/40 ZR18 92Y 2 fitments
GenerationI (PD) 2017–2021
Power247 hp
Engine2.0L G4KH I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
225/40 ZR18 92Y18x7.5 ET53 5x114.335TiresRims
235/35 ZR19 91Y19x8 ET55 5x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.