Skip to content

2011 Hyundai i40 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Hyundai i40.

2011 Hyundai i40 tire sizes

Bolt pattern
Fitment tables

3 trims sold in 2011

Open a trim for its factory package and every alternative size, front and rear.

Hyundai i40 VF

2011 – 2015 3 trims

i40 1.6 GDi

133 hp · G4FD I4 205/60 R16 92V 3 fitments
GenerationVF 2011–2015
Power133 hp
EngineG4FD I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R16 92V16x7 ET40 5x114.333TiresRims
215/50 R17 95V17x7.5 ET46 5x114.335TiresRims
225/45 R18 95V18x8 ET46 5x114.335TiresRims

i40 1.7 CRDi

134 hp · 1.7L D4FD I4 205/60 R16 92V 3 fitments
GenerationVF 2011–2015
Power134 hp
Engine1.7L D4FD I4, Diesel
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
205/60 R16 92V16x7 ET40 5x114.333TiresRims
215/50 R17 95V17x7.5 ET46 5x114.335TiresRims
225/45 R18 95V18x8 ET46 5x114.335TiresRims

i40 2.0 GDi

176 hp · 2.0L G4NC I4 215/50 R17 95V 2 fitments
GenerationVF 2011–2015
Power176 hp
Engine2.0L G4NC I4, Petrol
Center bore67.1 mm
PCD5x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/50 R17 95V17x7.5 ET46 5x114.335TiresRims
225/45 R18 95V18x8 ET46 5x114.335TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.