2014 Hyundai i800 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Hyundai i800.

2014 Hyundai i800 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2008 – 2018 Europe market 2 trims

134 hp · D4CB I4 215/70 R16 108T 5 fitments

GenerationTQ 2008–2018

Power134 hp

EngineD4CB I4, Diesel

Center bore92.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/70 R16 108T	16x6.5 ET50 ~~6x139.7~~	3.3	Tires Rims
215/70 R16 108T	16x6.5 ET56 ~~6x139.7~~	3.3	Tires Rims
215/65 R17 106T	17x6.5 ET56 ~~6x139.7~~	3.3	Tires Rims
225/60 R17 106T	17x7 ET50 ~~6x139.7~~	3.3	Tires Rims
225/65 R17 108S	17x7 ET50 ~~6x139.7~~	3.3	Tires Rims

168 hp · D4CB I4 215/70 R16 108T 5 fitments

GenerationTQ 2008–2018

Power168 hp

EngineD4CB I4, Diesel

Center bore92.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/70 R16 108T	16x6.5 ET50 ~~6x139.7~~	3.3	Tires Rims
215/70 R16 108T	16x6.5 ET56 ~~6x139.7~~	3.3	Tires Rims
215/65 R17 106T	17x6.5 ET56 ~~6x139.7~~	3.3	Tires Rims
235/60 R17 106T	17x7 ET50 ~~6x139.7~~	3.3	Tires Rims
235/55 R18 105H	18x7.5 ET50 ~~6x139.7~~	3.3	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.