Skip to content

2021 Hyundai iLoad tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2021 Hyundai iLoad.

Bolt pattern
Fitment tables

2 trims sold in 2021

Open a trim for its factory package and every alternative size, front and rear.

Hyundai iLoad TQ Facelift

2018 – 2021 Australia market 2 trims

iLoad 2.5 CRDi

168 hp · 2.5L D4CB I4 215/70 R16 108T 5 fitments
GenerationTQ Facelift 2018–2021
Power168 hp
Engine2.5L D4CB I4, Diesel
Center bore92.5 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/70 R16 108T16x6.5 ET50 6x139.73.3TiresRims
215/70 R16 108T16x6.5 ET56 6x139.73.3TiresRims
215/65 R17 106T17x6.5 ET56 6x139.73.3TiresRims
235/60 R17 106T17x7 ET50 6x139.73.3TiresRims
235/55 R18 105H18x7.5 ET50 6x139.73.3TiresRims

iLoad 2.5 CRDi

134 hp · 2.5L D4CB I4 215/70 R16 108T 5 fitments
GenerationTQ Facelift 2018–2021
Power134 hp
Engine2.5L D4CB I4, Diesel
Center bore92.5 mm
PCD6x139.7
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
215/70 R16 108T16x6.5 ET50 6x139.73.3TiresRims
215/70 R16 108T16x6.5 ET56 6x139.73.3TiresRims
215/65 R17 106T17x6.5 ET56 6x139.73.3TiresRims
225/60 R17 106T17x7 ET50 6x139.73.3TiresRims
225/65 R17 108T17x7 ET50 6x139.73.3TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.