1990 Hyundai Pony tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1990 Hyundai Pony.

1990 Hyundai Pony tire sizes

175/70R13

Bolt pattern

4x114.3

3 generations were sold in 1990. Check your chassis code before ordering wheels.

Other years

1986 1987 1988 1989 1990 1991 1992 1993 All 1975–1994

Fitment tables

3 trims sold in 1990

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Hyundai Pony X2

1990 – 1994 Europe market 1 trim

Pony 1.5

82 hp · 1.5L I4 155x R13 2 fitments

GenerationX2 1990–1994

Power82 hp

Engine1.5L I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x R13	13x4.5 4.5J ~~4x114.3~~	–	Tires Rims
175/70 R13	13x5 ET46 ~~4x114.3~~	–	Tires Rims

Hyundai Pony X1

1985 – 1990 Europe market 1 trim

Pony 1.5

83 hp · 1.5L I4 155x R13 2 fitments

GenerationX1 1985–1990

Power83 hp

Engine1.5L I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x R13	13x4.5 ~~4x114.3~~	–	Tires Rims
175/70 R13	13x5 ET46 ~~4x114.3~~	–	Tires Rims

Hyundai Pony II

1982 – 1990 Europe market 1 trim

Pony 1.4

67 hp · 1.4L I4 155x R13 1 fitment

GenerationII 1982–1990

Power67 hp

Engine1.4L I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
155x R13	13x4.5 ~~4x114.3~~	–	Tires Rims

Reading the table

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.