Skip to content

2008 Hyundai Porter tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2008 Hyundai Porter.

2008 Hyundai Porter tire sizes

Bolt patterns
5x120
IV (HR), III (AU)

2 generations were sold in 2008. Check your chassis code before ordering wheels.

Fitment tables

5 trims sold in 2008

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Hyundai Porter IV (HR)

2004 – 2023 2 trims

Porter 2.5 D

125 hp · 2.5L D4CB I4 195x R15 2 fitments
GenerationIV (HR) 2004–2023
MarketSouth Korea
Power125 hp
Engine2.5L D4CB I4, Diesel
Center bore67.1 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195x R1515x5.5 ET40 5x1204.4TiresRims
205/70 R1616x6 ET40 5x1204.4TiresRims

Porter 2.5 D DRW

125 hp · 2.5L D4CB I4 195/70 R15 2 fitments
GenerationIV (HR) 2004–2023
MarketSouth Korea
Power125 hp
Engine2.5L D4CB I4, Diesel
Center borefront axis 67.1 mm rear axis 122.0 mm
PCDfront axis 5x120 rear axis 5x160
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/70 R1513x4 ET100 front axis 5x120 rear axis 5x1604.4TiresRims
195/70 R1512x4 ET100 front axis 5x120 rear axis 5x1604.4TiresRims

Hyundai Porter III (AU)

1996 – 2011 3 trims

Porter 2.5 D

79 hp · 2.5L D4BA I4 185x R14 3 fitments
GenerationIII (AU) 1996–2011
MarketEurope
Power79 hp
Engine2.5L D4BA I4, Diesel
Center bore67.1 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185x R1414x5.5 ET40 5x120–TiresRims
195/70 R1515x6 ET40 5x12055 F / 65 RTiresRims
185/65 R1414x5.5 ET40 5x120–TiresRims

Porter 2.6 D

79 hp · D4BB I4 185x R14 2 fitments
GenerationIII (AU) 1996–2011
MarketSoutheast Asia
Power79 hp
EngineD4BB I4, Diesel
Center bore67.1 mm
PCD5x120
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185x R1414x5.5 ET40 5x1204.5TiresRims
195/70 R1515x6 ET40 5x1204.5TiresRims

Porter 2.6 D DRW

79 hp · D4BB I4 185x R14 2 fitments
GenerationIII (AU) 1996–2011
MarketSoutheast Asia
Power79 hp
EngineD4BB I4, Diesel
Center borefront axis 67.1 mm rear axis 122.0 mm
PCDfront axis 5x120 rear axis 5x160
ThreadM14 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185x R1412x4 ET100 front axis 5x120 rear axis 5x1604.5TiresRims
195/70 R1513x4 ET100 front axis 5x120 rear axis 5x1604.5TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.