2011 Hyundai Santa Fe Classic tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2011 Hyundai Santa Fe Classic.

2011 Hyundai Santa Fe Classic tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2007 – 2012 2 trims

111 hp · 2.0L D4EA I4 225/70 R16 102H 5 fitments

GenerationSM 2007–2012

Power111 hp

Engine2.0L D4EA I4, Diesel

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/70 R16 102H	16x6.5 ET46 ~~5x114.3~~	30	Tires Rims
215/70 R15 98T	15x6 ET46 ~~5x114.3~~	30	Tires Rims
225/70 R16 101S	16x6.5 ET46 ~~5x114.3~~	30	Tires Rims
225/70 R16 102T	16x7 ET46 ~~5x114.3~~	30	Tires Rims
225/60 R17 104H	17x7 ET46 ~~5x114.3~~	30	Tires Rims

170 hp · 2.7L G6BA V6 225/70 R16 102H 3 fitments

GenerationSM 2007–2012

Power170 hp

Engine2.7L G6BA V6, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/70 R16 102H	16x6.5 ET46 ~~5x114.3~~	30	Tires Rims
225/70 R16 102T	16x7 ET46 ~~5x114.3~~	30	Tires Rims
235/60 R17 104H	17x7 ET46 ~~5x114.3~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.