1991 Hyundai Scoupe tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1991 Hyundai Scoupe.

1991 Hyundai Scoupe tire sizes

175/70R13 185/60RH14

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1990 – 1992 1 trim

80 hp · 1.5 L I4 Petrol 1.5 L I4 175/70 R13 2 fitments

GenerationScoupe 1990–1992

MarketUSA

Power80 hp

Engine1.5 L I4 Petrol 1.5 L I4, Petrol

Center bore67.1 mm

PCD4x114.3

ThreadM12 x 1.5

Fit	Tire size	Rim size and bolt pattern	Pressure, psi	Prices
OE	175/70 R13	13x5 ET38 ~~4x114.3~~	–	Tires Rims
OE	185/60 HR14	14x5.5 ET35 ~~4x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.