Skip to content

2012 Hyundai Solaris tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2012 Hyundai Solaris.

Bolt pattern
Fitment tables

2 trims sold in 2012

Open a trim for its factory package and every alternative size, front and rear.

Hyundai Solaris I (RBr)

2011 – 2014 2 trims

Solaris 1.4i

106 hp · 1.4L G4FA I4 175/70 R14 84T 5 fitments
GenerationI (RBr) 2011–2014
Power106 hp
Engine1.4L G4FA I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84T14x5.5 ET43 4x10030TiresRims
185/65 R15 88H15x6 ET48 4x10032TiresRims
185/60 R16 87H16x6 ET52 4x10032TiresRims
195/55 R16 87H16x6 ET52 4x10032TiresRims
195/50 R16 84H16x6.5 ET48 4x10032TiresRims

Solaris 1.6i

121 hp · 1.6L G4FC I4 175/70 R14 84T 5 fitments
GenerationI (RBr) 2011–2014
Power121 hp
Engine1.6L G4FC I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R14 84T14x5.5 ET43 4x10032TiresRims
185/65 R15 88H15x6 ET48 4x10032TiresRims
195/55 R16 87H16x6 ET52 4x10032TiresRims
195/50 R16 84H16x6.5 ET48 4x10032TiresRims
205/45 R17 84V17x6.5 ET48 4x10035TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.