Skip to content

2019 Hyundai Solaris tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2019 Hyundai Solaris.

Bolt pattern
Fitment tables

2 trims sold in 2019

Open a trim for its factory package and every alternative size, front and rear.

Hyundai Solaris II (HCr)

2017 – 2020 2 trims

Solaris 1.4i

99 hp · 1.4L G4LC I4 185/65 R15 88H 5 fitments
GenerationII (HCr) 2017–2020
Power99 hp
Engine1.4L G4LC I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 88H15x6 ET46 4x10033TiresRims
185/65 R15 88H15x6 ET48 4x10033TiresRims
185/60 R16 87H16x6 ET48 4x10033TiresRims
195/55 R16 87H16x6 ET49 4x10033TiresRims
205/45 R17 85V17x6.5 ET50 4x10036TiresRims

Solaris 1.6i

121 hp · 1.6L G4FG I4 185/65 R15 88H 5 fitments
GenerationII (HCr) 2017–2020
Power121 hp
Engine1.6L G4FG I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/65 R15 88H15x6 ET46 4x10033TiresRims
185/65 R15 88H15x6 ET48 4x10033TiresRims
195/55 R16 87H16x6 ET49 4x10033TiresRims
205/50 R17 87V17x6.5 ET50 4x10033TiresRims
215/45 R17 87V17x7 ET45 4x10036TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.