Skip to content

1996 Hyundai Sonica tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Hyundai Sonica.

1996 Hyundai Sonica tire sizes

Bolt pattern

2 generations were sold in 1996. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 1996

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Hyundai Sonica I (Y3) Facelift

1996 – 1998 2 trims

Sonica 1.8i (Saloon)

84 hp · 1.8 L I4 Petrol 1.8 L I4 195/70 R14 3 fitments
GenerationI (Y3) Facelift 1996–1998
MarketEurope
Power84 hp
Engine1.8 L I4 Petrol 1.8 L I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE195/70 R1414x5.5 ET46 4x114.3–TiresRims
Alt195/65 R1515x6 ET40 4x114.3–TiresRims
Alt205/55 R1616x6.5 ET38 4x114.3–TiresRims

Sonica 2.0i (Saloon)

123 hp · 2.0 L I4 Petrol 2.0 L I4 205/60 R15 3 fitments
GenerationI (Y3) Facelift 1996–1998
MarketEurope
Power123 hp
Engine2.0 L I4 Petrol 2.0 L I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE205/60 R1515x6 ET40 4x114.3–TiresRims
Alt195/70 R1414x5.5 ET46 4x114.3–TiresRims
Alt225/50 R1616x6.5 ET38 4x114.3–TiresRims

Hyundai Sonica I (Y3)

1993 – 1996 1 trim

Sonica 2.0i (Saloon)

103 hp · 2.0 L I4 Petrol 2.0 L I4 195/70 R14 3 fitments
GenerationI (Y3) 1993–1996
MarketEurope
Power103 hp
Engine2.0 L I4 Petrol 2.0 L I4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE195/70 R1414x5.5 ET46 4x114.3–TiresRims
Alt195/65 R1515x6 ET40 4x114.3–TiresRims
Alt205/55 R1616x6.5 ET38 4x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.