2002 Hyundai Terracan tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Hyundai Terracan.

2002 Hyundai Terracan tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2001 – 2007 3 trims

99 hp · 2.5L D4BH I4 235/75 R15 109T 2 fitments

GenerationHP 2001–2007

Power99 hp

Engine2.5L D4BH I4, Diesel

Center bore106.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/75 R15 109T	15x6 ET35 ~~6x139.7~~	29	Tires Rims
255/65 R16 109T	16x7 ET20 ~~6x139.7~~	29	Tires Rims

148 hp · 2.9L J3 I4 235/75 R15 109T 2 fitments

GenerationHP 2001–2007

Power148 hp

Engine2.9L J3 I4, Diesel

Center bore106.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
235/75 R15 109T	15x6 ET35 ~~6x139.7~~	29	Tires Rims
255/65 R16 109T	16x7 ET20 ~~6x139.7~~	29	Tires Rims

192 hp · 3.5L G6CU V6 255/65 R16 109T 2 fitments

GenerationHP 2001–2007

Power192 hp

Engine3.5L G6CU V6, Petrol

Center bore106.1 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
255/65 R16 109T	16x7 ET20 ~~6x139.7~~	29	Tires Rims
255/60 R17 106T	17x7.5 ET10 ~~6x139.7~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.