Skip to content

1997 Hyundai Tiburon tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1997 Hyundai Tiburon.

1997 Hyundai Tiburon tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1997

Open a trim for its factory package and every alternative size, front and rear.

Hyundai Tiburon RD

1996 – 1999 3 trims

Tiburon 1.6i

111 hp · I4 195/60 R14 3 fitments
GenerationRD 1996–1999
Power111 hp
EngineI4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/60 R1414x5.5 ET51 4x114.3–TiresRims
195/55 R1515x6 ET46 4x114.3–TiresRims
205/45 R1616x7 ET38 4x114.3–TiresRims

Tiburon 1.8i

130 hp · I4 195/55 R15 3 fitments
GenerationRD 1996–1999
Power130 hp
EngineI4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R1515x6 ET46 4x114.3–TiresRims
195/60 R1414x5.5 ET51 4x114.3–TiresRims
205/45 R1616x7 ET38 4x114.3–TiresRims

Tiburon 2.0i

139 hp · I4 195/55 R15 4 fitments
GenerationRD 1996–1999
Power139 hp
EngineI4, Petrol
Center bore67.1 mm
PCD4x114.3
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
195/55 R1515x6 ET46 4x114.3–TiresRims
195/60 R1414x5.5 ET51 4x114.3–TiresRims
205/45 R1616x7 ET38 4x114.3–TiresRims
225/40 R1616x7.5 ET35 4x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.