Skip to content

2026 Hyundai Verna tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2026 Hyundai Verna.

2026 Hyundai Verna tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2026

Open a trim for its factory package and every alternative size, front and rear.

Hyundai Verna V (BN7)

2023 – 2027 2 trims

Verna 1.5 MPi (Saloon)

113 hp · 1.5 L G4FL I4 Petrol 1.5 L G4FL I4 185/65 R15 3 fitments
GenerationV (BN7) 2023–2027
MarketSoutheast Asia
Power113 hp
Engine1.5 L G4FL I4 Petrol 1.5 L G4FL I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE185/65 R1515x5.5 ET43 4x10034 F / 31 RTiresRims
Alt205/55 R1616x6.5 ET51 4x10034 F / 31 RTiresRims
Alt205/50 R1717x6.5 ET50 4x10034 F / 31 RTiresRims

Verna 1.5 T-GDi (Saloon)

158 hp · 1.5 L G4LH I4 Petrol 1.5 L G4LH I4 205/55 R16 3 fitments
GenerationV (BN7) 2023–2027
MarketSoutheast Asia
Power158 hp
Engine1.5 L G4LH I4 Petrol 1.5 L G4LH I4, Petrol
Center bore54.1 mm
PCD4x100
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE205/55 R1616x6.5 ET51 4x10034 F / 31 RTiresRims
Alt205/50 R1717x6.5 ET50 4x10034 F / 31 RTiresRims
Alt205/50 R1717x7 ET45 4x10034 F / 31 RTiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.