Skip to content

2025 IM LS7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2025 IM LS7.

2025 IM LS7 tire sizes

Bolt pattern

2 generations were sold in 2025. Check your chassis code before ordering wheels.

Fitment tables

2 trims sold in 2025

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

IM LS7 S11L Facelift

2025 – 2027 1 trim

LS7 EV (SUV, 5d)

776 hp · Electric 255/55 R20 / 275/50 R20 3 fitments
GenerationS11L Facelift 2025–2027
MarketChina
Power776 hp
EngineElectric, Electric
Center bore57.1 mm
PCD5x120
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront255/55 R2020x8 ET46 5x12036TiresRims
Rear275/50 R2020x8.5 ET38 5x12036TiresRims
AltFront255/55 R2020x8 ET46 5x12036TiresRims
Rear275/50 R2020x9 ET38 5x12036TiresRims
AltFront255/45 R2222x8.5 ET46 5x12036TiresRims
Rear285/40 R2222x10 ET38 5x12036TiresRims

IM LS7 S11L

2023 – 2025 1 trim

LS7 EV (SUV, 5d)

570 hp · Electric 255/55 R20 / 275/50 R20 4 fitments
GenerationS11L 2023–2025
MarketChina
Power570 hp
EngineElectric, Electric
Center bore57.1 mm
PCD5x120
ThreadM14 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront255/55 R2020x8 ET46 5x12036TiresRims
Rear275/50 R2020x8.5 ET38 5x12036TiresRims
Alt255/55 R2020x8 ET46 5x12036TiresRims
AltFront255/55 R2020x8 ET46 5x12036TiresRims
Rear275/50 R2020x9 ET38 5x12036TiresRims
AltFront255/45 R2222x8.5 ET46 5x12036TiresRims
Rear285/40 R2222x10 ET38 5x12036TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.