2014 Infiniti FX tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2014 Infiniti FX.

2014 Infiniti FX tire sizes

265/50R20 265/45R21

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2008 – 2014 USA market 3 trims

235 hp · 3.0L V9X V6 265/50 R20 107V 2 fitments

GenerationS51 2008–2014

Power235 hp

Engine3.0L V9X V6, Diesel

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/50 R20 107V	20x8 ET50 ~~5x114.3~~	–	Tires Rims
265/45 ZR21 104W	21x9.5 ET50 ~~5x114.3~~	–	Tires Rims

315 hp · V6 265/50 R20 107V 2 fitments

GenerationS51 2008–2014

Power315 hp

EngineV6, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/50 R20 107V	20x8 ET50 ~~5x114.3~~	–	Tires Rims
265/45 ZR21 104W	21x9.5 ET50 ~~5x114.3~~	–	Tires Rims

385 hp · 5.0L V8 265/45 ZR21 104W 2 fitments

GenerationS51 2008–2014

Power385 hp

Engine5.0L V8, Petrol

Center bore66.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/45 ZR21 104W	21x9.5 ET50 ~~5x114.3~~	–	Tires Rims
265/50 R20 107V	20x8 ET50 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.