Skip to content

2002 Infiniti G tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2002 Infiniti G.

Bolt patterns

2 generations were sold in 2002. Check your chassis code before ordering wheels.

Fitment tables

3 trims sold in 2002

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

Infiniti G V35

2002 – 2007 USA market 2 trims

G 3.5i coupe

280 hp · 3.5L VQ35DE V6 225/50 R17 93V / 235/50 R17 95V 3 fitments
GenerationV35 2002–2007
Power280 hp
Engine3.5L VQ35DE V6, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
Front225/50 R17 93V17x7.5 ET30 5x114.330TiresRims
Rear235/50 R17 95V17x8 ET33 5x114.330TiresRims
Front225/45 ZR18 91W18x8 ET30 5x114.335TiresRims
Rear245/45 ZR18 96W18x8 ET30 5x114.335TiresRims
Front225/40 ZR19 89Y19x8 ET30 5x114.335TiresRims
Rear245/40 ZR19 94Y19x8.5 ET33 5x114.335TiresRims

G 3.5i sedan

260 hp · VQ35DE V6 205/65 R16 94V 6 fitments
GenerationV35 2002–2007
Power260 hp
EngineVQ35DE V6, Petrol
Center bore66.1 mm
PCD5x114.3
ThreadM12 x 1.25
Tire sizeRim size and bolt patternPressure, psiPrices
205/65 R16 94V16x6.5 ET45 5x114.330TiresRims
215/55 R17 93V17x7 ET45 5x114.330TiresRims
215/55 ZR17 93W17x7 ET45 5x114.330TiresRims
235/50 ZR17 95W17x7.5 ET45 5x114.330TiresRims
235/45 ZR18 93W18x7.5 ET45 5x114.333TiresRims
245/45 ZR18 95W18x8 ET42 5x114.333TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.