1995 Isuzu Aska tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Isuzu Aska.

1995 Isuzu Aska tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1994 – 1997 Japan market 1 trim

138 hp · I4 195/60 R15 88T 4 fitments

GenerationIII 1994–1997

Power138 hp

EngineI4, Petrol

Center bore64.1 mm

PCD4x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/60 R15 88T	15x6 ET60 ~~4x114.3~~	32	Tires Rims
205/50 R16 88T	16x6.5 ET48 ~~4x114.3~~	32	Tires Rims
205/45 R17 88T	17x7 ET45 ~~4x114.3~~	32	Tires Rims
225/35 R18 88T	18x7.5 ET45 ~~4x114.3~~	32	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.