1985 Isuzu Fargo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1985 Isuzu Fargo.

1985 Isuzu Fargo tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1980 – 1994 Japan market 2 trims

59 hp · I4 195x R14 100L 4 fitments

GenerationI 1980–1994

Power59 hp

EngineI4, Diesel

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195x R14 100L	14x5.5 ET30 ~~6x139.7~~	26	Tires Rims
205/80 R14 100L	14x6 ET33 ~~6x139.7~~	26	Tires Rims
205/75 R15 100L	15x6 ET33 ~~6x139.7~~	26	Tires Rims
215/65 R16 99M	16x6.5 ET35 ~~6x139.7~~	29	Tires Rims

93 hp · I4 195/80 R15 100L 4 fitments

GenerationI 1980–1994

Power93 hp

EngineI4, Petrol

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/80 R15 100L	15x5.5 ET30 ~~6x139.7~~	26	Tires Rims
215/70 R15 100L	15x6.5 ET35 ~~6x139.7~~	26	Tires Rims
225/70 R15 100L	15x7 ET38 ~~6x139.7~~	26	Tires Rims
225/65 R16 99M	16x7 ET38 ~~6x139.7~~	29	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.