1993 Isuzu Fargo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1993 Isuzu Fargo.

1993 Isuzu Fargo tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1980 – 1994 Japan market 2 trims

78 hp · I4 205/80 R14 102N 3 fitments

GenerationI 1980–1994

Power78 hp

EngineI4, Diesel

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/80 R14 102N	14x6 ET33 ~~6x139.7~~	29	Tires Rims
205/75 R15 102M	15x6 ET33 ~~6x139.7~~	29	Tires Rims
215/65 R16 101P	16x6.5 ET35 ~~6x139.7~~	30	Tires Rims

133 hp · I4 205/80 R14 102M 3 fitments

GenerationI 1980–1994

Power133 hp

EngineI4, Diesel

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/80 R14 102M	14x6 ET33 ~~6x139.7~~	29	Tires Rims
225/65 R16 101P	16x7 ET38 ~~6x139.7~~	30	Tires Rims
235/55 R17 101P	17x7 ET38 ~~6x139.7~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.