2001 Isuzu Fargo tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2001 Isuzu Fargo.

2001 Isuzu Fargo tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1995 – 2001 Japan market 2 trims

84 hp · I4 185x R15 102N 3 fitments

GenerationII 1995–2001

Power84 hp

EngineI4, Diesel

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185x R15 102N	15x5.5 ET30 ~~6x139.7~~	26	Tires Rims
195/80 R15 102N	15x6 ET33 ~~6x139.7~~	29	Tires Rims
205/75 R15 102N	15x6 ET33 ~~6x139.7~~	29	Tires Rims

133 hp · I4 195/80 R15 102P 4 fitments

GenerationII 1995–2001

Power133 hp

EngineI4, Diesel

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
195/80 R15 102P	15x5.5 ET30 ~~6x139.7~~	29	Tires Rims
205/70 R16 102P	16x6 ET33 ~~6x139.7~~	29	Tires Rims
215/65 R16 102Q	16x6.5 ET35 ~~6x139.7~~	30	Tires Rims
225/60 R17 102Q	17x7 ET38 ~~6x139.7~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.