Skip to content
tirewheelguide.com

1986 Isuzu Gemini tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1986 Isuzu Gemini.

1986 Isuzu Gemini tire sizes

185/60R14185/55R15195/50R15195/45R16175/70R13175/65R14195/55R14175/55R15
Bolt pattern
Other years
19821983198419851986198719881989 All 1974–2000
Fitment tables

3 trims sold in 1986

Open a trim for its factory package and every alternative size, front and rear.

Isuzu Gemini II

1985 – 1989 Japan market 3 trims

Gemini 1.5i

99 hp · I4 175/70 R13 82T 4 fitments
GenerationII 1985–1989
Power99 hp
EngineI4, Petrol
Center bore56.6 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/70 R13 82T13x5 ET39 4x10029TiresRims
175/65 R14 82T14x5.5 ET41 4x10029TiresRims
175/55 R15 80H15x6 ET45 4x10030TiresRims
185/55 R15 81H15x6 ET43 4x10030TiresRims

Gemini 1.5i Turbo

118 hp · I4 185/60 R14 82H 4 fitments
GenerationII 1985–1989
Power118 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R14 82H14x5.5 ET42 4x10030TiresRims
195/55 R14 82H14x6 ET45 4x10030TiresRims
195/50 R15 82H15x6 ET45 4x10030TiresRims
195/45 R16 82H16x6.5 ET42 4x10030TiresRims

Gemini 1.6i

138 hp · I4 185/60 R14 82H 4 fitments
GenerationII 1985–1989
Power138 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R14 82H14x5.5 ET42 4x10030TiresRims
185/55 R15 81H15x6 ET43 4x10030TiresRims
195/50 R15 82H15x6 ET45 4x10030TiresRims
195/45 R16 82H16x6.5 ET42 4x10033TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.

Open the size calculator
Recent articles

Guides worth reading first

All articles
Basics

How to read a tire sidewall

Reading a tire sidewall is easy. Find out what the size, load index, speed rating and date code mean.

Continue reading
Guide

Everything you need to know about tire tread depth

Tire tread depth is an important factor in keeping your vehicle safe — how to measure it and when to replace.

Continue reading
Gear

Best supercapacitor jump starter review

We tested seven supercapacitor jump starters to find the ones worth buying.

Continue reading