1996 Isuzu Gemini tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1996 Isuzu Gemini.

1996 Isuzu Gemini tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1993 – 1996 Japan market 2 trims

93 hp · I4 175/70 R13 82H 4 fitments

GenerationIV 1993–1996

Power93 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/70 R13 82H	13x5 ET39 ~~4x100~~	30	Tires Rims
185/60 R14 82H	14x5.5 ET42 ~~4x100~~	30	Tires Rims
195/50 R15 82H	15x6.5 ET45 ~~4x100~~	30	Tires Rims
205/40 R16 82H	16x7 ET42 ~~4x100~~	30	Tires Rims

118 hp · I4 175/65 R14 82H 4 fitments

GenerationIV 1993–1996

Power118 hp

EngineI4, Petrol

Center bore56.1 mm

PCD4x100

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
175/65 R14 82H	14x5 ET39 ~~4x100~~	30	Tires Rims
185/55 R15 82H	15x6 ET43 ~~4x100~~	30	Tires Rims
195/45 R16 82H	16x6.5 ET45 ~~4x100~~	30	Tires Rims
205/40 R17 82H	17x7 ET42 ~~4x100~~	30	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.