2007 Isuzu i-Series tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 Isuzu i-Series.

2007 Isuzu i-Series tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2005 – 2008 USA market 2 trims

182 hp · I4 225/75 R15 112S 4 fitments

GenerationGMT355 2005–2008

Power182 hp

EngineI4, Petrol

Center bore100.3 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/75 R15 112S	15x6.5 ET23 ~~6x139.7~~	32	Tires Rims
235/75 R15 112S	15x6.5 ET23 ~~6x139.7~~	32	Tires Rims
245/70 R16 110S	16x7 ET25 ~~6x139.7~~	32	Tires Rims
255/65 R17 108H	17x7.5 ET25 ~~6x139.7~~	35	Tires Rims

236 hp · I5 265/75 R15 112S 4 fitments

GenerationGMT355 2005–2008

Power236 hp

EngineI5, Petrol

Center bore100.3 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
265/75 R15 112S	15x7 ET33 ~~6x139.7~~	32	Tires Rims
265/70 R16 110S	16x7 ET28 ~~6x139.7~~	32	Tires Rims
265/65 R17 110H	17x8 ET28 ~~6x139.7~~	35	Tires Rims
265/60 R18 110H	18x8 ET28 ~~6x139.7~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.