2010 Isuzu KB tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2010 Isuzu KB.

2010 Isuzu KB tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2002 – 2010 1 trim

N/A · I4 205x R15 110S 6 fitments

GenerationDH 2002–2010

PowerN/A

EngineI4, Diesel

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205x R15 110S	15x6 ET35 ~~6x139.7~~	26	Tires Rims
225/75 R15 108S	15x6.5 ET35 ~~6x139.7~~	28	Tires Rims
235/75 R15 108S	15x7 ET38 ~~6x139.7~~	28	Tires Rims
245/70 R16 108T	16x7 ET40 ~~6x139.7~~	29	Tires Rims
255/65 R17 108T	17x7 ET40 ~~6x139.7~~	32	Tires Rims
265/55 R18 105H	18x8 ET30 ~~6x139.7~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.