2013 Isuzu MU-7 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 Isuzu MU-7.

2013 Isuzu MU-7 tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2004 – 2013 1 trim

174 hp · V6 245/70 R16 110S 4 fitments

GenerationDH 2004–2013

Power174 hp

EngineV6, Diesel

Center bore100.5 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
245/70 R16 110S	16x7 ET33 ~~6x139.7~~	35	Tires Rims
255/65 R17 110H	17x7 ET33 ~~6x139.7~~	35	Tires Rims
255/60 R18 110H	18x7.5 ET35 ~~6x139.7~~	35	Tires Rims
265/55 R18 110V	18x8 ET30 ~~6x139.7~~	36	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.