1995 Isuzu Panther tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Isuzu Panther.

1995 Isuzu Panther tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1991 – 2000 Southeast Asia market 1 trim

59 hp · 2.2L C223 I4 185x R14 102S 4 fitments

GenerationTBR52, TBR54 1991–2000

Power59 hp

Engine2.2L C223 I4, Diesel

Center bore92 mm

PCD6x139.7

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
185x R14 102S	14x5.5 ~~6x139.7~~	35	Tires Rims
205/65 SR15	15x6 ~~6x139.7~~	35	Tires Rims
205/65 SR15	15x6.5 ET20 ~~6x139.7~~	35	Tires Rims
235/70 SR15	15x6.5 ET20 ~~6x139.7~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.