Skip to content

2003 Isuzu Trooper tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2003 Isuzu Trooper.

2003 Isuzu Trooper tire sizes

Bolt pattern
Fitment tables

2 trims sold in 2003

Open a trim for its factory package and every alternative size, front and rear.

Isuzu Trooper II Facelift

1998 – 2003 2 trims

Trooper 3.0 DTi (Closed Off-Road Vehicle, 5d)

157 hp · 3.0 L 4JX1 I4 Diesel 3.0 L 4JX1 I4 245/70 R16 2 fitments
GenerationII Facelift 1998–2003
MarketEurope
Power157 hp
Engine3.0 L 4JX1 I4 Diesel 3.0 L 4JX1 I4, Diesel
Center bore100.1 mm
PCD6x139.7
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE245/70 R1616x7 ET38 6x139.730TiresRims
Alt255/65 R1717x7 ET38 6x139.730TiresRims

Trooper 3.5i (Closed Off-Road Vehicle, 5d)

212 hp · 3.5 L 6VE1 V6 Petrol 3.5 L 6VE1 V6 245/70 R16 4 fitments
GenerationII Facelift 1998–2003
MarketUSA
Power212 hp
Engine3.5 L 6VE1 V6 Petrol 3.5 L 6VE1 V6, Petrol
Center bore100.1 mm
PCD6x139.7
ThreadM12 x 1.5
FitTire sizeRim size and bolt patternPressure, psiPrices
OE245/70 R1616x7 ET38 6x139.730TiresRims
Alt225/75 R1616x6 ET35 6x139.730TiresRims
Alt255/60 R1818x7.5 ET33 6x139.730TiresRims
Alt265/55 R1818x8 ET28 6x139.730TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.