Skip to content

2013 JAC J3 (Tojoy) tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2013 JAC J3 (Tojoy).

2013 JAC J3 (Tojoy) tire sizes

Bolt pattern

2 generations were sold in 2013. Check your chassis code before ordering wheels.

Fitment tables

4 trims sold in 2013

Open a trim for its factory package and every alternative size, front and rear. More than one generation was on sale this year — check the chassis code against your VIN before ordering.

JAC J3 (Tojoy) Facelift

2013 – 2016 Latin America market 2 trims

J3 (Tojoy) 1.3i

106 hp · I4 185/60 R15 2 fitments
GenerationFacelift 2013–2016
MarketLatin America
Power106 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R1515x5.5 ET46 4x100–TiresRims
195/50 R1616x6 ET45 4x100–TiresRims

J3 (Tojoy) 1.5i

125 hp · I4 Flex-Fuel 185/60 R15 2 fitments
GenerationFacelift 2013–2016
MarketLatin America
Power125 hp
EngineI4 Flex-Fuel
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
185/60 R1515x5.5 ET46 4x100–TiresRims
195/50 R1616x6 ET45 4x100–TiresRims

JAC J3 (Tojoy) J3 (Tojoy)

2008 – 2013 China market 2 trims

J3 (Tojoy) 1.3i

98 hp · 4G13 I4 175/65 R14 2 fitments
GenerationJ3 (Tojoy) 2008–2013
MarketChina
Power98 hp
Engine4G13 I4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R1414x5 ET45 4x100–TiresRims
185/60 R1515x5.5 ET45 4x100–TiresRims

J3 (Tojoy) 1.5i

102 hp · I4 175/65 R14 2 fitments
GenerationJ3 (Tojoy) 2008–2013
MarketChina
Power102 hp
EngineI4, Petrol
Center bore56.1 mm
PCD4x100
ThreadM12 x 1.5
Tire sizeRim size and bolt patternPressure, psiPrices
175/65 R1414x5 ET45 4x100–TiresRims
185/60 R1515x5.5 ET45 4x100–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.