2016 JAC Refine M5 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2016 JAC Refine M5.

2016 JAC Refine M5 tire sizes

225/60R17 225/55R18

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2012 – 2023 China market 3 trims

161 hp · HFC4GA5-1C I4 225/60 R17 2 fitments

GenerationRefine M5 2012–2023

Power161 hp

EngineHFC4GA5-1C I4, Petrol

Center bore67.1 mm

PCD5x120

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/60 R17	17x6.5 ET40 ~~5x120~~	–	Tires Rims
225/55 R18	18x7 ET40 ~~5x120~~	–	Tires Rims

137 hp · HFC4DB1-2D I4 225/60 R17 2 fitments

GenerationRefine M5 2012–2023

Power137 hp

EngineHFC4DB1-2D I4, Diesel

Center bore67.1 mm

PCD5x120

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/60 R17	17x6.5 ET40 ~~5x120~~	–	Tires Rims
225/55 R18	18x7 ET40 ~~5x120~~	–	Tires Rims

174 hp · 2.0L HFC4GA3-1D I4 225/60 R17 2 fitments

GenerationRefine M5 2012–2023

Power174 hp

Engine2.0L HFC4GA3-1D I4, Petrol

Center bore67.1 mm

PCD5x120

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/60 R17	17x6.5 ET40 ~~5x120~~	–	Tires Rims
225/55 R18	18x7 ET40 ~~5x120~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.