2007 JAC Rein tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2007 JAC Rein.

2007 JAC Rein tire sizes

225/70R16 225/65R17

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2007 – 2011 China market 2 trims

134 hp · HFC4GA3.C I4 225/70 R16 2 fitments

GenerationRein 2007–2011

Power134 hp

EngineHFC4GA3.C I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/70 R16	16x6.5 ET45 ~~5x114.3~~	–	Tires Rims
225/65 R17	17x6.5 ET45 ~~5x114.3~~	–	Tires Rims

148 hp · HFC4GA1.C I4 225/70 R16 2 fitments

GenerationRein 2007–2011

Power148 hp

EngineHFC4GA1.C I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.25

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
225/70 R16	16x6.5 ET45 ~~5x114.3~~	–	Tires Rims
225/65 R17	17x7 ET45 ~~5x114.3~~	–	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.