Skip to content

2024 JAC X200 tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2024 JAC X200.

2024 JAC X200 tire sizes

Bolt pattern
Fitment tables

4 trims sold in 2024

Open a trim for its factory package and every alternative size, front and rear.

JAC X200 X200

2018 – 2027 4 trims

X200 1.6i

118 hp · 2.8 L I4 Petrol 2.8 L I4 175/75 R16 / 175/75 R16 1 fitment
GenerationX200 2018–2027
MarketChina
Power118 hp
Engine2.8 L I4 Petrol 2.8 L I4, Petrol
Center bore67.1 mm
PCD5x120
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront175/75 R1616x 5x120–TiresRims
Rear175/75 R16 5x120–Tires

X200 1.9TD

94 hp · 1.9 L D19TCID6 I4 Diesel 1.9 L D19TCID6 I4 195/70 R15 / 195/70 R15 1 fitment
GenerationX200 2018–2027
MarketSoutheast Asia
Power94 hp
Engine1.9 L D19TCID6 I4 Diesel 1.9 L D19TCID6 I4, Diesel
Center bore67.1 mm
PCD5x120
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront195/70 R1515x 5x120–TiresRims
Rear195/70 R15 5x120–Tires

X200 2.0T

134 hp · 2.0 L HFC4DB2-1D I4 Diesel 2.0 L HFC4DB2-1D I4 195/70 R15 / 195/70 R15 1 fitment
GenerationX200 2018–2027
MarketMexico
Power134 hp
Engine2.0 L HFC4DB2-1D I4 Diesel 2.0 L HFC4DB2-1D I4, Diesel
Center bore67.1 mm
PCD5x120
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront195/70 R1515x 5x120–TiresRims
Rear195/70 R15 5x120–Tires

X200 2.8TD

107 hp · 2.8 L I4 Diesel 2.8 L I4 195/70 R15 / 195/70 R15 1 fitment
GenerationX200 2018–2027
Power107 hp
Engine2.8 L I4 Diesel 2.8 L I4, Diesel
Center bore67.1 mm
PCD5x120
ThreadM12 x 1.25
FitTire sizeRim size and bolt patternPressure, psiPrices
OEFront195/70 R1515x 5x120–TiresRims
Rear195/70 R15 5x120–Tires
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.