1976 Jaguar XJS tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1976 Jaguar XJS.

1976 Jaguar XJS tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1975 – 1980 Europe market 1 trim

285 hp · 5.3L 8S V12 205/70 VR15 4 fitments

GenerationSeries 1 1975–1980

Power285 hp

Engine5.3L 8S V12, Petrol

Center bore73.8 mm

PCD5x120.65

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/70 VR15	15x6 ET28 ~~5x120.65~~	2	Tires Rims
215/70 VR15	15x6.5 ET32 ~~5x120.65~~	2	Tires Rims
235/60 VR15	15x6.5 ET32 ~~5x120.65~~	2.2	Tires Rims
225/55 ZR16	16x7 ET32 ~~5x120.65~~	2.2	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.