Skip to content

2006 Jeep Cherokee tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Jeep Cherokee.

Fitment tables

3 trims sold in 2006

Open a trim for its factory package and every alternative size, front and rear.

Jeep Cherokee III (KJ)

2001 – 2008 3 trims

Cherokee 2.4i

145 hp · 2.4L ED1 I4 235/70 SR16 4 fitments
GenerationIII (KJ) 2001–2008
Power145 hp
Engine2.4L ED1 I4, Petrol
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/70 SR1616x7 ET41.3 5x114.333TiresRims
235/65 HR1717x7.5 ET33.2 5x114.335TiresRims
235/60 HR1818x7.5 ET35 5x114.335TiresRims
235/55 HR1919x8 ET35 5x114.336TiresRims

Cherokee 2.8 CRD

161 hp · 2.8L ENR I4 235/70 SR16 4 fitments
GenerationIII (KJ) 2001–2008
Power161 hp
Engine2.8L ENR I4, Diesel
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/70 SR1616x7 ET41.3 5x114.333TiresRims
235/65 HR1717x7.5 ET33.2 5x114.335TiresRims
255/60 HR1717x8 ET35 5x114.335TiresRims
255/55 VR1818x8.5 ET33 5x114.336TiresRims

Cherokee 3.7i

201 hp · 3.7L EKG V6 235/65 HR17 4 fitments
GenerationIII (KJ) 2001–2008
Power201 hp
Engine3.7L EKG V6, Petrol
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/65 HR1717x7.5 ET33.2 5x114.335TiresRims
255/55 HR1818x8 ET35 5x114.336TiresRims
255/50 HR1919x8.5 ET33 5x114.336TiresRims
265/45 VR2020x9 ET30 5x114.338TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.