1987 Jeep Comanche tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1987 Jeep Comanche.

1987 Jeep Comanche tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

1986 – 1992 USA market 3 trims

84 hp · J8S I4 205/75 R15 99S 5 fitments

GenerationI (MJ) 1986–1992

Power84 hp

EngineJ8S I4, Diesel

Center bore71.5 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 R15 99S	15x7 ET25 ~~5x114.3~~	33	Tires Rims
215/75 R15 100S	15x7 ET25 ~~5x114.3~~	33	Tires Rims
225/70 R15 100S	15x7 ET25 ~~5x114.3~~	33	Tires Rims
225/75 R15 102S	15x7 ET25 ~~5x114.3~~	33	Tires Rims
225/70 R16 102S	16x7 ET25 ~~5x114.3~~	33	Tires Rims

121 hp · AMC150 I4 205/75 R15 99S 5 fitments

GenerationI (MJ) 1986–1992

Power121 hp

EngineAMC150 I4, Petrol

Center bore71.5 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 R15 99S	15x7 ET25 ~~5x114.3~~	33	Tires Rims
215/75 R15 100S	15x7 ET25 ~~5x114.3~~	33	Tires Rims
225/75 R15 102S	15x7 ET25 ~~5x114.3~~	33	Tires Rims
225/70 R15 100S	15x7 ET25 ~~5x114.3~~	33	Tires Rims
225/70 R16 102S	16x7 ET25 ~~5x114.3~~	33	Tires Rims

173 hp · AMC242 I6 205/75 R15 99S 5 fitments

GenerationI (MJ) 1986–1992

Power173 hp

EngineAMC242 I6, Petrol

Center bore71.5 mm

PCD5x114.3

Thread1/2" - 20 UNF

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
205/75 R15 99S	15x7 ET25 ~~5x114.3~~	33	Tires Rims
215/75 R15 100S	15x7 ET25 ~~5x114.3~~	33	Tires Rims
225/75 R15 102S	15x7 ET25 ~~5x114.3~~	33	Tires Rims
225/70 R15 100S	15x7 ET25 ~~5x114.3~~	33	Tires Rims
225/70 R16 102S	16x7 ET25 ~~5x114.3~~	33	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.