2006 Jeep Compass tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2006 Jeep Compass.

2006 Jeep Compass tire sizes

Bolt pattern

Other years

Fitment tables

Open a trim for its factory package and every alternative size, front and rear.

2006 – 2010 2 trims

138 hp · 2.0L ECD ECE I4 215/60 R17 95H 5 fitments

GenerationI (MK) 2006–2010

Power138 hp

Engine2.0L ECD ECE I4, Diesel

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R17 95H	17x6.5 ET39 ~~5x114.3~~	35	Tires Rims
215/55 R18 95H	18x7 ET39 ~~5x114.3~~	35	Tires Rims
205/70 SR16	16x6.5 ET42 ~~5x114.3~~	32	Tires Rims
205/65 SR17	17x6.5 ET40 ~~5x114.3~~	33	Tires Rims
225/55 HR18	18x7 ET39 ~~5x114.3~~	35	Tires Rims

168 hp · 2.4L ED3 I4 215/60 R17 95H 5 fitments

GenerationI (MK) 2006–2010

Power168 hp

Engine2.4L ED3 I4, Petrol

Center bore67.1 mm

PCD5x114.3

ThreadM12 x 1.5

Tire size	Rim size and bolt pattern	Pressure, psi	Prices
215/60 R17 95H	17x6.5 ET39 ~~5x114.3~~	35	Tires Rims
215/55 R18 95H	18x7 ET39 ~~5x114.3~~	35	Tires Rims
225/60 HR17	17x7 ET40 ~~5x114.3~~	35	Tires Rims
235/55 VR17	17x7.5 ET40 ~~5x114.3~~	35	Tires Rims
235/50 VR18	18x7.5 ET40 ~~5x114.3~~	35	Tires Rims

Reading the table

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.