Skip to content

1995 Jeep Grand Cherokee tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 1995 Jeep Grand Cherokee.

1995 Jeep Grand Cherokee tire sizes

Bolt pattern
Fitment tables

3 trims sold in 1995

Open a trim for its factory package and every alternative size, front and rear.

Jeep Grand Cherokee I (ZJ)

1992 – 1998 USA market 3 trims

Grand Cherokee 2.5TD

115 hp · 2.5L I4 215/75 SR15 4 fitments
GenerationI (ZJ) 1992–1998
Power115 hp
Engine2.5L I4, Diesel
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
215/75 SR1515x7 ET25.4 5x114.3–TiresRims
225/75 SR1515x7 ET32 5x114.3–TiresRims
225/70 SR1515x7 ET32 5x114.3–TiresRims
245/70 SR1515x7 ET25 5x114.3–TiresRims

Grand Cherokee 4.0i

185 hp · 4.0L I6 215/75 SR15 4 fitments
GenerationI (ZJ) 1992–1998
Power185 hp
Engine4.0L I6, Petrol
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
215/75 SR1515x7 ET25.4 5x114.3–TiresRims
225/70 SR1515x7 ET32 5x114.3–TiresRims
225/75 SR1515x7 ET32 5x114.3–TiresRims
245/70 SR1515x7 ET25 5x114.3–TiresRims

Grand Cherokee 5.2i

220 hp · 5.2L V8 215/75 SR15 4 fitments
GenerationI (ZJ) 1992–1998
Power220 hp
Engine5.2L V8, Petrol
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
215/75 SR1515x7 ET25.4 5x114.3–TiresRims
225/75 SR1515x7 ET32 5x114.3–TiresRims
245/70 SR1515x7.5 ET25 5x114.3–TiresRims
255/65 SR1616x7.5 ET25 5x114.3–TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.