Skip to content

2005 Jeep Liberty tire and wheel sizes, bolt pattern and tire pressure

Check the tables below for every tire size, wheel size, bolt pattern (PCD), rim offset and tire pressure fitted to the 2005 Jeep Liberty.

Fitment tables

3 trims sold in 2005

Open a trim for its factory package and every alternative size, front and rear.

Jeep Liberty I (KJ)

2001 – 2007 USA market 3 trims

Liberty 2.4i

150 hp · 2.4L I4 215/75 R16 6 fitments
GenerationI (KJ) 2001–2007
Power150 hp
Engine2.4L I4, Petrol
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
215/75 R1616x7 ET31.75 5x114.3–TiresRims
225/75 R16 104S16x7 ET41.3 5x114.333TiresRims
235/70 SR1616x7 ET41.3 5x114.332TiresRims
235/65 HR1717x7 ET41.3 5x114.335TiresRims
235/60 HR1818x7.5 ET35 5x114.335TiresRims
235/55 VR1919x7.5 ET35 5x114.335TiresRims

Liberty 2.8 CRD

161 hp · 2.8L R428 I4 225/75 R16 104S 6 fitments
GenerationI (KJ) 2001–2007
Power161 hp
Engine2.8L R428 I4, Diesel
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
225/75 R16 104S16x7 ET37.3 5x114.333TiresRims
235/70 SR1616x7 ET41.3 5x114.332TiresRims
235/65 HR1717x7 ET41.3 5x114.335TiresRims
235/65 R1717x7.5 ET33.27 5x114.335TiresRims
255/60 HR1717x8 ET35 5x114.335TiresRims
255/55 VR1818x8.5 ET33 5x114.335TiresRims

Liberty 3.7i

210 hp · 3.7L V6 235/70 R16 104T 9 fitments
GenerationI (KJ) 2001–2007
Power210 hp
Engine3.7L V6, Petrol
Center bore71.5 mm
PCD5x114.3
Thread1/2" - 20 UNF
Tire sizeRim size and bolt patternPressure, psiPrices
235/70 R16 104T16x7 ET41.3 5x114.333TiresRims
235/65 HR1717x7 ET41.3 5x114.335TiresRims
215/75 R1616x7 ET31.75 5x114.335TiresRims
225/75 R16 104S16x7 ET37.3 5x114.333TiresRims
235/65 R1717x7.5 ET33.27 5x114.333TiresRims
235/60 HR1818x7.5 ET33.2 5x114.335TiresRims
255/50 VR1818x8 ET35 5x114.335TiresRims
255/50 VR1919x8.5 ET33 5x114.335TiresRims
265/45 ZR2020x9 ET30 5x114.336TiresRims
Reading the table

What these columns mean

OE fitment
The package fitted at the factory for that trim.
Alternative
A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.

Considering a different size?

Run your OE size against the one you want to see diameter change, ground clearance and speedometer error.